BS 5308-1Specifies requirements for and dimensions of polyethylene insulated cables in pairs, with or without screens and optionally incorporating single wire armour or lead sheath with single wire armour.
BS 5308-2Specifies requirements for and dimensions of PVC insulated cables in multicore and multipair construction, with or without screens and optionally incorporating single wire armour.
BS 5467Specification for cables with thermosetting insulation for electricity supply for rated voltages of up to and including 600/1000 V and up to and including 1900/3300 V.
BS 6004PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring.
BS 6231Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring.
BS 6360Specification for conductors in insulated cables and cords.
BS 6500 Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments.
BS 7211Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke & corrosive gases when fire.
BS 7919Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments.
CECE is addressed to public authorities and not consumers, indicates conformity with the "essential safety requirements" set out in New Approach EU Directives.
CSA c22.2 - 127This standard applies to insulated conductors intended for internal wiring of electrical equipment, for leads of transformers, motors, etc., and for luminous-tube signs and ignition systems.
DIN 47100Regulation of the color coding for the identification of cores in telecommunication cables.
EN 50265Methods of test for resistance to vertical flame propagation for a single electrical insulated conductor or cable, or optical cable, under fire conditions.
EN 50266Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables.
HD 21.3Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring.
HD 21.5Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords).
HD 22.2Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 2: Test methods.
HD 383Conductors of insulated cables - First supplement: Guide to the dimensional limits of circular conductors.
HD 603Distribution cables of rated voltage 0,6/1 kV.
IEC 60228Conductors of insulated cables. Specifies the nominal cross-sectional areas, in the range 0,5 mm2 to 2 500 mm2, for conductors in electric power cables and cords of a wide range of types.
IEC 60332-1-3Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/
IEC 60332-2-2Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame.
IEC 60332-3Tests on electric cables under fire conditions.
IEC 60502Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV).
IEC 60754-2Test on gases evolved during combustion of electric cables - degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH & conductivity.
IEC 61034-1 & 2Measurement of smoke density of cables burning under defined conditions.
UL 758Standard for Safety of Appliance Wiring Material.
UNE 21123-2Industrial cables of rated voltage 0,6/1 kV. Part 2: XLPE insulated and PVC Sheathed cables.
VDE 0482-267-1Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables.
Latest News
Standards & Norms
> BS
> UNE
> NFC
> CE
> UL/CSA
> IEC
> HD/HAR
> DIN/VDE
> EN
Tel：
Fax：
info@kabeland.com
Kabeland
Kabeland have solid experience with all major international standards as IEC, VDE, BS, ... and has the expertise in the field of Control Cable, Signaling Cable, Industrial Cable, Instrumentation Cable, Building Wire, Tri-rated Cable, Power Cable, Armoured Cable, Low Smoke Halogen Free (LSOH / LSZH) Cable,[...]
